TJ Rear Coil Correction Kit

the product fit great! I like the alignment marks so they fit in the proper place without any guess work. Heavy steel construction should outlast the factory frame. I used the stock mounting location but could see the stretch version helping those with custom suspensions. The captured nuts are a great addition and adds confidence that the nut will not spin loose. I highly recommend this product and have used other Artec products with great success. Rob M.

I love this kit. Perfect fit, well designed and thought out. My LJ has a 2.5” rear lift, and a 3.5” belly-up, making the rear axle pinion angled at equivalent to 6” of lift. With that kind of rotation on my axle, it was necessary to relocate the upper coil bracket to align my bump stops. This did just that. The only thing I wish it had is in the flat plate, I wish it had 2 mounting holes for the standard location and the 1” stretch location. It’s nice how the upper portion allows the 2 mounting location options, but it would be nice to be able to change it from one location to the other after the kit has been installed. But once it is welded up, you only have access to the one mounting location you decided with when assembling.

Awesome product!!! Quality is beyond expectations. Clear through instructions. This was my first artec product and will definitely not be my last!!!

Great fitment and easy to assemble.

These are really beefy hardware. I'm super impressed with the fit and like how there is a scribe mark for removing part of the bracket if you still have the factory track bar mount, makes it 1000% percent easier to install. I only have 3.5" springs but since I did the tummy tuck I had to move my pinion up even more, these really help to keep the spring as vertical as possible...certainly not bowed as much anymore.

These are very well engineered! Easy to assemble and install. Location markings on the parts are very helpful for placement. I definitely recommend these!

I would recommend this if you still running coils. Until I can afford coilovers. But I like the flexing better than the buckling due to the Engle before this correction. The only thing to watch for is that awful creaking after installing them. There is a pinch weld on the tub where it gets really close to the inner part of the bracket. I thought there was enough space but after welding and hitting the trails. It seems to have closed the gap and is now rubbing. I just bent that pinch weld away from the bracket to give it more room. Or you can grind it down before you weld it in place to get the proper clearance.

Quality, rugged and looks great. East to assemble and east to notch for the track bar bracket. Love these and now no more bowed springs

My son and I installed the relocators in about 4 hours total. The kit raised the rear of the jeep at least 1 1/2". The jeep no longer bottoms out with riders in the rear seat. Easy to follow instructions and well marked parts made installation simple. Thanks for a well engineered product.

Product was received as described with great instructions for installation. I definitely liked the laser etched cut lines on the bracket and labeled sides for ease of installation. I would highly recommend these and would buy again for future jeeps if needed!!!

These are a great bracket these are easy to assemble and install and look awesome adds a great look

Easy to follow instructions. Very good quality material and the Artec logo adds a nice touch to the final piece. Definitely recommend and will purchase more products in the future.

Product is high quality, very clear directions. Worked exactly as described.