Reid Racing Ford SuperDuty Highsteer Knuckle
Reid Racing Ford SuperDuty Highsteer Knuckle

Reid Racing Ford SuperDuty Highsteer Knuckle

Part Number: RR-D60002FR
SuperDuty Highsteer Knuckle
Weight: 25 lbs  Dimensions: 0x0x0
Availability: Drop Ship Direct from Mfg

Choose Options

*
Your Price: $389.00
Also available from these fine distributors
Also available from these fine distributors

Reid Racing's high-steer Ford SuperDuty (2005-2012 or 2012.5+ F250 & F350) steering knuckle is designed as a heavy-duty stock-replacement passenger-side knuckle that provides additional options for installing aftermarket steering linkage.  The primary improvements over the OEM knuckle include a flat-top pad for a bolt-on steering arm, dual steering stops, and increased overall strength.  The additional steering options allow this axle to be more easily installed into other vehicles while ensuring proper steering geometry.

  • Uses OEM 2005-2012 or 2012.5+ SuperDuty ball joints, unit bearing, caliper, rotor, lockout hub, stub shaft, and U-joint.  Ford changed the brakes and unit bearing on 2012.5 and later SuperDuties so newer trucks must choose the 2012.5+ option.
  • Flat-top pad measures 4.5 inches higher than the cast-in steering arm's top surface, and aftermarket steering arms of various heights can accommodate a wide range of suspension lifts.
  • Easy bolt-on installation with no machining required.
  • Antilock Brakes, Traction Control, Vacuum Hubs, and Electronic Stability Control systems are retained.
  • Cast from high-strength ductile iron and beefed up with extra material and ribbing.
  • Powdercoated orange for long lasting corrosion resistance.
  • Does not fit "Super 60" 10-lug axles (F450 & F550).
  • Cast-in steering arm is tapered from the top and bottom so the OEM steering linkage may be re-installed.


*** Knuckle for off road use only.
***There is no warranty on this product.



Recently Viewed Items

Sign Up for Our Newsletter
Get our deals in your email!
Mailing List
TOP