Adjustable Panhard Mount for Axle
This panhard mount is for use with any 3-link or 4-link scenario. Providing ideal geometry and clearances for other aftermarket components such as hydraulic rams and coilovers, this panhard mount matches the style and strength of the truss it fits. Designed for joints that have a 1.75" mounting width such as 3/4" and 7/8"x3/4" rod ends with high misalignment spacers. It offer three holes at 5, 6, and 7 inches from axle centerline to allow you to fine tune your suspension. Choose your desired orientation: centered on axle or offset to the front edge of the axle. For 3.0" axle tube diameter but can be trimmed to fit.
NOTE: May require a small amount of trimming if other brackets interfere.