Warning: Installing this product requires Welding and Fabrication skills, If you are not confident in your abilities to complete this task please have this installed at an qualified off-road shop .
Step 1.
Inventory all parts to ensure you have all of the correct pieces. If you are missing parts or the package is damaged Contact Artec Industries Immediately at (855) 278-3299 M-F 8:30-5pm MST If outside of those hours Email us at [email protected] (Please include picture of part number label on box as well as your invoice number Also keep the box and take pictures of the box per shipping carrier for a damage claim otherwise it could be denied )
Step 2.
Slip the PG1401-1 plate into the key ways on PG14xx-2 and tack weld into place
Step 3.
Using the 4 supplied bolts bolt the PG14xx-3 onto the PG14xx-2
Step 4.
Test fit the Pinion guard on the axle Depending on your pinion angle you may need to trim the PG14xx-3 bracket . Using a marker mark the top of the PG14xx-3 remove the pinion guard from the axle and trim were needed . Prep the truss for welding by removing any paint, rust, or grime.
Step 5.
Fully weld the PG14xx-1 & PG14xx-2 together , Now weld the PG14xx-3 to the truss.
Step 6.
Paint all bare surfaces .