Low Profile Ford Kingpin/Balljoint Front Truss (1985 - 1997)
Shown with Kingpin axle. Axle not included.

Low Profile Ford Kingpin/Balljoint Front Truss (1985 - 1997)

Part Number: TR6051
5 Review(s)
Low Profile Ford Kingpin/Balljoint Front Truss (1985 - 1997)
Weight: 38 lbs  Dimensions: 7x7x48
Availability: In Stock
Your Price: $279.99
Also available from these fine distributors
Also available from these fine distributors
Low Profile Ford Kingpin / Balljoint Front Truss 
(1985-1997)

The next generation of Artec trusses is here. This revolutionary new design takes the years of race and recreational abuse of our first generation of trusses and adds additional strength and functionality. The most noticeable is how the truss top now bends around the differential for a better fit and clearance. This is ideal for vehicles needing more uptravel or those building low center of gravity vehicles.

Features include:

  • Works for Ford Kingpin axles 1985-1991.5 and Ford Balljoint axles 1992-1997. Not applicable for 1978-1979 axles or later Superduty axles.

  • 3/8" thick mild steel truss top and 1/4" mild steel gussets. Precision CNC cut and bent for great fitment.*

  • Truss is super low profile allowing better clearance for oil pans and allowing more uptravel.

  • Truss spans entire length of axle for complete reinforcement of the axle tubes - not just for mounting links.

  • Truss is reinforced using interlocked 1/4 thick gussets for maximum strength and easy assembly.

  • Main interlocking gussets are wider than Gen1 trusses adding overall strength to truss

  • Internal gussets conform tightly to the contours of the differential allowing you to weld to it for additional strength and rigidity

  • Truss is clearanced for differential breather tube (adapters needed)

  • Overall low profile design means your axle is stronger, sleaker, easier to fit into any vehicle, and less likely to interfere with vehicle components.

  • Use our adjustable truss upper link mount and tall adjustable truss upper link mount to achieve 10 inches of separation from axle centerline (see accessories below)

  • Compatible with our RM6003 Ram Mount for 85-91.5 axle. LINK. See ACCESSORIES below

NOTE: This kit requires general welding and fabrication skills. Welding should only be done by a competent welder. Artec Industries implies no guarantees or warranties and is not liable for improper installation.
*Some grinding and fitment may be required when installing this kit. Every axle varies slightly and some fabrication may be required.

Related Items

60 FORD Front Ram Mount & Truss '85-'91.5
Ford 1985-91.5 axle has 3 inches of drivers side axle tube
(6)
$544.99
In Stock
Ford 85-91.5 60 Front Truss
Ford 1985-91.5 axle has ~3 inches of drivers side axle tube
(14)
$269.99
In Stock
Low Profile Ford SuperDuty Front Truss
Low Profile Ford SuperDuty Front Truss
(8)
$279.99
In Stock
Low Profile Front Truss for Ultimate Dana 60
Low Profile Front Truss for Ultimate Dana 60
(1)
$289.99
In Stock

Accessories

Adjustable Truss Upper Link Mount (single)
Adjustable Truss Upper Link Mount (single)
(8)
$29.99
In Stock
Coilover Tabs for Truss
Coilover Tabs for Truss
(20)
$16.99
In Stock
60 Lower Link Axle Brackets (pair)
For use ONLY with 60's with 3 inch short side tube length
(14)
$62.99
In Stock
Tall Adjustable Truss Upper Link Mount
Tall Adjustable Truss Upper Link Mount (single) - 2.625 inch joint mounting width
(3)
$35.99
In Stock
Weld on UCA Brackets for Low Pro Front Truss
Weld on UCA Brackets for Low Pro Front Truss
(2)
$89.99
In Stock
60 Full Hydro Ram Mount (No Truss)
Full Hydro Ram Mount - No Truss
(20)
$274.99
In Stock
Raised Trackbar Bracket for 3.5
Raised Trackbar Bracket for 3.5" Diameter Front Axle
(4)
$59.99
In Stock
Artec Hardcore Diff Cover for Dana 50, Dana 60 & Dana 70
Artec Hardcore Diff Cover for Dana 50, 60 & 70
$211.99
In Stock

Recently Viewed Items

Sign Up for Our Newsletter
Get our deals in your email!
Mailing List
TOP