JK Front Inner Fenders - FREEDOM EDITION

Part Number: JK2110

9 Review(s)

Questions about this item? Ask here.

Write a Review

JK Front Inner Fenders - FREEDOM EDITION Flag cutout

Weight: 10.5 lbs Dimensions: 6x24x30

Availability: In Stock

Your Price: $197.99

Quantity

CALIFORNIA WARNING:Cancer and Reproductive Harm - www.P65Warnings.ca.gov

Also available from these fine distributors

Description
Customer Reviews
Questions and Answers
Instructions

JK Front Inner Fenders - FREEDOM EDITION

Artec Industries is excited to announce our new JK Front Inner Fenders. These aluminum fenders not only protect your engine compartment from dirt and debris but do it in style. Our proprietary process of stamping our logo not only adds an additional element of style not seen in the industry but also increases the rigidity of the whole inner fender. In addition, the laser cut vents keep your engine compartment cool and don't require you to bolt on an extra piece of mesh material. All this at a PHENOMENAL PRICE and manufactured in-house which means its MADE IN THE USA!

Features:

SHOW YOUR NATIONAL PRIDE with the American Flag cut into the Artec A-blade logo
Proprietary A-blade stamping process for increased rigidity and mackdaddy status
Lightweight 1/16" Aluminum construction
CNC laser cut and CNC bent for precise fit
Can easily be trimmed for use with coilovers or bumpstops without ruining the vented area
Can be used with Artec Nighthawk Fenders and most any other aftermarket fender*
Compatible with Trimmed OEM fenders
Laser cut venting means no extra pieces of material to bolt on
Allows use of larger tires
Two piece construction for lower cost of shipping
Pressed PEM nuts on seam between pieces for easy installation
Price is per pair - Includes Passenger and Driver side inner fenders
Shipped bare unfinished aluminum for decreased cost and ability for you to paint or powdercoat to fit your style**

NOTE: While all precautions are made to ensure the aluminum surface is protected, small scratches from either the raw material from the factory, the manufacturing process, or the shipping process may be present in this UNFINISHED product. We recommend you finish this product with either painting, powdercoating or another similar process and prepare the surface prior to finishing as you would normally to remove any minor blemishes.

*Mounts to OEM holes on subframe plus additional holes to be drilled. See instuctions for hole locations to determine if modification will be necessary to install with aftermarket fenders.

**While aluminum is rust resistant, it is recommended to have some type of coating for long term corrosion protection.

Rating Snapshot

Select a row below to filter reviews.

Average Customer Ratings

4.9

The freedom edition inner fenders look great. The quality and instructions were top. The only thing not explained well was how to use the rivet install tool.

Did you find this helpful? 4 of 5 Found Helpful

Reviewed by: Kris Rice from NH on 9/25/2017

Nice inner fenders

Very nicely made inner fenders, love the look. Install was pretty simple, only complaint was the nutsert would not fit in a 11/32 drill hole, had to drill a 25/64. Don’t know if I got a weird set or what, but happy none the less

Did you find this helpful? 2 of 2 Found Helpful

Reviewed by: Chuck from Midway,NC on 9/12/2021

Easy to install they look good and no rattles as of yet. I’ve had them on for one month. The only thing I didn’t like was having to put the rivet in at the rear of the front fender. It’s a bit of a pita

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Brian Annis from Bakersfield on 1/5/2020

Freedom edition inner fenders - JK

Love these inner fenders. They look and fit great. Very well made, like all of your products, and the American flag integrated into the logo is awesome!

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Jason from Tulsa, OK on 4/15/2019

Inner fenders

These inner fenders arrived fast, we're very easy to install, and look AWESOME with the freedom edition logo.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Max Aaron from Orange, tx on 11/25/2017

Owner

Nice fit, easy install, looks awesome. Looking forward to a rear set coming out.

Did you find this helpful? 1 of 1 Found Helpful

Reviewed by: Allen Wiseman from Florida on 9/18/2017

A company at it,s finest

We originally had a set put on our 2dr by an employee of Artec and liked them so much we came back shopping for another set for our 4dr!! Great product, amazing people and downright amazing quality!!!!! You wont be dissapointed! Purchase today

Did you find this helpful? 1 of 2 Found Helpful

Reviewed by: Jaclyn Burden from Surprise, Az on 9/12/2017

Artec Freedom Edition Front Inner Liners

So happy I made this purchase. Out of the many different companies out there making these right now, the Freedom Edition j. aluminum has been a wise choice. These being aluminum will help fight any kind of corrosion due to the salt air where I live as well as the salt treatments on the road during winter time months. The fit was even better and everything lined up perfectly. They allow great clearance for the 37’s I’m running currently. Being I themed my Jeep for the Thin Blue Line support, these were a wonderful addition. Next I will be saving up for the rear set to complete the look. Wishing they offer the same design in Freedom Edition for the rears at some point.

Did you find this helpful?

Reviewed by: Robert Adamczyk from Toms River,NJ on 8/10/2020

Freedom inner fenders for JK

When I got them, they were exactly what i was looking for. They went on easily. I painted mine with a can of truck bed liner except for the stars and stripes. I left them the original color as they came. Worth the money.

Did you find this helpful?

Reviewed by: Christopher Hooper from Bassett on 7/24/2020

Q: Do you give military discount?

Asked by: Troy Goodman - 8/1/2017

A: Yes, We do offer a 15% Military Discount . We would need you to send in a email from your military email accnt inorder to validate.

Was this answer helpful? 6 of 7 Customer(s) found this Answer helpful.

Answer provided by: Tom Kellough (8/2/2017)

Submit an answer

Q: Do you give a Veteran discount?

Asked by: Debra - 5/4/2018

A: Yes we do give a 15% discount to active duty military and veterans . You will need to Email [email protected] with proof of service from a DOD Email address or status of Separation for us to distribute the coupon code

Was this answer helpful? 2 of 2 Customer(s) found this Answer helpful.

Answer provided by: Tom Kellough (5/7/2018)

Submit an answer

Q: Are these vented?

Asked by: MATTHEW - 2/16/2018

A: Yes the freedom editions are vented

Was this answer helpful? 0 of 1 Customer(s) found this Answer helpful.

Answer provided by: Tom Kellough (2/16/2018)

Submit an answer

Q: Will these inner fenders work with the Falcon 3.3 shocks or will they have to be cut? I plan on using these with the Metalcloak Overline front fenders. Thank you in advance for your reply.

Asked by: Chet Cobb - 8/28/2018

A: You can run the inner fenders with the falcon 3.3's with a little trimming so you can access the adjuster but a portion of the reservoir will be covered .

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Tom Kellough (8/28/2018)

Submit an answer

Q: Do these work with the OEM fenders? What if any modifications are required to the OEM fenders to make these fit?

Asked by: Patrick Arnold - 6/27/2019

A: Yes, Our inner fenders will work with oem fenders you would need to remove the inner fender liner to install these .

Was this answer helpful? 0 of 0 Customer(s) found this Answer helpful.

Answer provided by: Tom Kellough (6/27/2019)

Submit an answer

Questions about this item? Ask here.

JK Front Inner Fenders - Vented

(3)

$197.99

In Stock

Add To Cart

JK Front Inner Fenders - Solid

(9)

$164.99

In Stock

Add To Cart

JK Front Inner Fenders - FREEDOM EDITION

Rating Snapshot

Average Customer Ratings

Q: Do you give military discount?

Q: Do you give a Veteran discount?

Q: Are these vented?

Q: Will these inner fenders work with the Falcon 3.3 shocks or will they have to be cut? I plan on using these with the Metalcloak Overline front fenders. Thank you in advance for your reply.

Q: Do these work with the OEM fenders? What if any modifications are required to the OEM fenders to make these fit?

Related Items

Recently Viewed Items

Mailing List