Q: Can I use the existing control arm mounts or do I have to cut them off and use the ones on the truss?
A: You can use the existing mounts. See the 4th small inset images on the product page for details on how the Passenger Side Mount needs to be modified to work.
Q: Is this for the high or low pinion d30, or will it work for both?
A: This is for the HP D30 if you have the LP D30 you will want the TJ Truss P/N : TJ3001 , TJ3002, or TJ 3003 depending on what upper bushing configuration you want.
Q: Does this truss require getting new track bar mounts or will you be able to use factory ones still?
A: You can still retain the factory trackbar mount, or use a raised trackbar mount if converting to crossover or highsteer
Q: Can I use regular Moog K3166 bushings in your Artec UCA mount?
With enough pre-heat, will my 110v mig gas welder suffice?
Is the Dana 30 housing cast iron or cast steel?
A: You cannot fit that bushing in the bracket but it looks like it will fit in the casting UCA mount. The bracket requires an external sleeve which we provide in our kit if you choose the bushing option.
You can use that welder. The housing is cast steel.
Q: Need details on Grease Fittings for Artec Truss on Jeep XJ / Dana 30 w/Johnny Joints. Seem like very Small Metric Fittings and come loose 1 already gone on the trail, can't find at local auto parts store. Please let me know if these are available as Spares?
A: Here is the link to the zerk fittings on the greasable bolt. 10-32 is the correct size.
Q: Will you be able to use your factory sway bar mounts with this truss?
A: Yes you can still retain your factory sway bar mounts with the truss it does not change their location or interfere with them since the mounts are on the opposite side of the spring buckets
Q: can I use this Truss to swap a HP30 into a TJ?
A: Yes you can use the XJ truss to swap a HP30 into a TJ
Do you ship to the uk?
A: Yes we do ship internationally inorder to get an accurate quoute you would need to Email [email protected] with all the part #'s you would want to order along with name address and phone number so we can respond with a quote for shipping .
Q: Can i order just the johnny joints for the upper control arms?
A: TJ3006 is the part number for the johnny joints it would come with a new ps upper mount it is sold as a kit so we can not break it up
Q: How do I install the daystar bushing into the axle with the XJ3002 ?
A: For the TJ3002 Option to install the bushing you would need to retain the metal cup that is pressed into the axle housing on the drive side and burn the bushing out . Once the part has cooled you will slip the poly bushing sleeve and bushing into the metal cup.