MAKE THE MOST OUT OF YOUR
SuperDuty Double Sheer High Steer Arms
This Knuckle Bolt Kit is designed to work specifically with our Superduty 05+ Double Sheer High Steer Arms (LINK) to both strengthen the entire knuckle and steering as well as provide options for mounting your steering. Whether you just need to re-enforce your knuckle or want to run your tie rod in double sheer, this kit is designed with to fit multiple different steering configurations. There are virtually endless mounting possibilities.
Please choose Passenger side or Driver side.
3/4" - 16 tpi 8" long Grade 8 bolt
3/4" - 16 tpi All-steel Mechanical Lock nut*
Machined 1.25" OD - .250" wall DOM sleeve with tapered sleeve for top of knuckle
Tapered Stainless Steel Spacer for bottom of knuckle
- Increases overall knuckle and steering strength
Cut middle section out for mounting 3/4" heim in DOUBLE SHEER**
Choose your tie rod mounting height
For increased strength, sleeve can be welded to knuckle
- NOTE: This kit only works on 05+ Superduty Axles not necessarily in the Superduty itself. This is intended for use with our Double Shear Superduty High Steer arms (HS6120, HS6121, HS6122) NOT our normal Superduty High Steer Arms. Refer to ACCESSORIES below for compatible products.
- Factory tie rod end hole on the DRIVER SIDE knuckle will need to be drilled to a 3/4" hole for this kit to work. Tapered end of driver side sleeve will need to be cut off as well since the top of the hole is not tapered.**
- To clear differential cover, the Tie Rod must have two bends in it, similar to the OEM tie rod, when used with this knuckle bolt.
*All-steel mechanical locking nuts (aka distorted thread or Stover locknuts) are designed NOT to be reused to ensure the nut does not loosen over time. This provides the best type of locking nut for steering applications. Please use a new nut if you remove it at any point.
**This part may require basic steel cutting tools to use. Please use caution when cutting steel. Only experienced fabricators should attempt these modifications. Artec Industries, LLC is not liable for injury and/or death due to use or modification of this product.