(0) Item / $0
Call: 855-278-3299 | Hi Guest, Login! |

  

Jeep JK Lower Control Arm Brackets (pair)

Jeep JK Lower Control Arm Brackets (pair)

Your Price:$59.99
In Stock
Part Number:JK4412
Also available from these fine distributors
Jeep Wrangler JK HD Lower

 Control Arm Brackets
 
Beef up your front axle LCA brackets on your 2007 - 2017 Jeep JK (All 4x4 models)
 Do you have bent and mangled factory lower control arm brackets? Its no surprise since they are practically made of sheet-metal. These HEAVY DUTY brackets replace the factory brackets so you'll never have to worry about ripping off a bracket again.
 
But what makes ours better? Instead of making an exact copy of the factory bracket, we added some features to actually IMPROVE the functionality. Check out the features below that sets ours apart from the competition.
  • 2.625" mounting width fits common sized Cartridge Joints (Johnny, Flex, Ballistic, etc) and factory control arm bushings.
  • Skid plate of bottom of bracket wraps around joint protecting it from direct impact and decreases premature wear on the joint. This leads to longer life and less replacements. Skid plate design does not restrict movement of joint.
  • Bracket wraps around axle tube more than factory for additional weld surface area, which significantly reduces the chance the bracket can rip off.
  • Made from 1/4" thick boxed steel plate for strength and impact resistance.
  • Grease fitting access on top to allow easy maintenance of your most abused joint.
  • The STYLE of the bracket gives a unique, custom one-off look you'd get with a high dollar fabrication shop. No more brackets that look like modified pieces of angle iron or c-channel, but rather formed pieces of artwork to show off.

NOTE: IF USING FACTORY CONTROL ARMS, YOU MAY NEED TO GRIND OFF A SMALL AMOUNT OF THE METAL BELOW THE BUSHING TO CLEAR THE SKID PLATE ON THE BRACKET. This bracket requires welding to the axle and removal of the factory bracket. Welding should be done by a competent welder and Artec Industries is not liable for incorrect installation or improper welding.

5 Stars
B
Awesome product very heavy duty perfect fitment good value.can't be happier
Did you find this helpful?  2 of 2 Found Helpful
Reviewed by:  from Omaha NE. on 8/27/2016
5/5
5 Stars
ASSISTANT MANAGER
BRACKETS CAME IN ASAP. EASY TO INSTALL
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from EL PASO TX. on 7/24/2017
5/5
5 Stars
Rami
Great brackets
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Houston. on 7/6/2017
5/5
5 Stars
Great product
I ripped off one of the stock LCA mounts on my JKU. I had these Artec brackets welded on and they are super beefy. Definitely don't have to worry about them getting ripped off again! In my opinion, if you are going to wheel your JK, this is a necessary upgrade.
Did you find this helpful?  1 of 1 Found Helpful
Reviewed by:  from Alpharetta, GA. on 4/23/2017
5/5
5 Stars
LCM
Got to love them no more folded potato chip mounts. Easy to line up.
Did you find this helpful?  1 of 2 Found Helpful
Reviewed by:  from Michigan. on 3/23/2016
5/5
5 Stars
Owner
Brackets are easy to install and have the correct degree to match the axle. Well make, thick metal to hold up for the long term. Great product.
Did you find this helpful? 
Reviewed by:  from 425 McCombs Chaparral NM. on 6/11/2019
5/5
5 Stars
Lower control arm brackets
This product is awesome. Very solid and strong. Fit is perfect and ready for install. Would suggest for anyone wanting to prevent bending those flimsy stock brackets!
Did you find this helpful? 
Reviewed by:  from Denver. on 5/26/2019
5/5
5 Stars
Great upgrade!
Purchases after my son bent the stock lower control arm mount. These are much stronger than the oem mounts. Easy to locate where they went. Was charged another $100 for a professional welder, but well worth it. I coupled these mounts with the Rugged Ridge adjustable lower control arms and I couldn’t be happier.
Did you find this helpful? 
Reviewed by:  from Florida. on 2/24/2019
5/5
5 Stars
Nice Beef!
I love all of Artec's parts. They are high quality, cut and bent with precision, and they fit perfectly every time. These are much beefier than the factory brackets.
Did you find this helpful? 
Reviewed by:  from Utah. on 2/11/2019
5/5
5 Stars
Darn Tuff
My JK found a culvert. The bracket bent nearly 2 inches out of position. Did a NUMBER on my steering setup. That factory bracket's "one step up from Aluminum Foil". These ARTEC brackets are what every JK ought to have! PS- they require a good welding job. I wouldn't do it with an everyday wire welder. So if your welder or skill is questionable, you better get PRO to put them on there so you can Forget About Em.
Did you find this helpful? 
Reviewed by:  from Memphis. on 1/23/2019
5/5

Related Items

Accessories

JK Rear LCA Brackets with Skids
Average Rating(3)
$121.99
In Stock
JK Rear Axle Truss
Average Rating(16)
$159.99
In Stock
JK Front Axle ARMOR KIT
Average Rating(37)
$319.99
In Stock

Recently Viewed Items

Connect With Us
Newsletter Sign Up
PayPalVisaMastercardAmerican ExpressDiscover
3dcart Design by The Cart Designer