(0) Item / $0
Call: 855-278-3299 | Hi Guest, Login! |

  

JKU ALUMINUM Long Arm Kit

JKU ALUMINUM Long Arm Kit

Your Price:$2,123.99
Kit Product. Typically IN STOCK. Call for availability
Part Number:LK7212

Choose Options

Add-on Crossmember with Link Mounts (choose one or none) help
2007 - 2011 Crossmember [+$389.99]
2012 - 2018 Crossmember [+$399.99]
Add-on Front Adjustable Truss Upper Link Mount help
Yes I need the axle side truss UCA mount. I have not purchased it prior (whether by itself or in a kit such as JK 1ton swap) [+$29.99]
Add-on FRONT 3-LINK FRAME MOUNT BRACKET help
Yes I need the frame side UCA mount. I have not purchased it prior. [+$49.99]
Add-on Rear 3-link Truss Bracket help
Yes I need the axle side truss UCA mount. I have not purchased it prior [+$54.99]
Add-on Long Arm Rear LCA Frame Brackets help
Yes I need the frame side LCA long arm mounts. I have not purchased them prior. [+$49.99]
Upgrade my OEM brackets to HD brackets (not needed if you have JK 1 ton swap) help
Add-on JK Rear LCA Brackets with Skids [+$121.99]
Add-on JK Rear Trackbar Bracket [+$62.99]
Also available from these fine distributors
Take your JK up a level or 3
Premium Aluminum Long Arm Kit for your JK

 For the PAST 5 YEARS, we've been testing 7075 Aluminum links in the ARTECON to ensure that they could handle the abuse of both extreme, heavy duty rock crawling and normal daily driving. We've been pleased with how they've handled the rigorous abuse and how much weight is saved by using is compared to standard steel tubing.

 The JKU ALUMINUM Long Arm Kit starts with our ARTEC ABUSE PROVEN 2.25" outer diameter, aerospace grade 7075 Aluminum lower links front and rear and 2.0" OD front upper link and couples it with Rock Krawler Suspension's Rear 3-link Conversion Upper Link and Bracket. The aluminum links are out-fitted with time-tested Rock Krawler brand Krawler Joints with a 1.25" thread and 9/16" hole and matching jam nuts. These are the same joints shipped in nearly every Rock Krawler lift kit so you know they stand up to the test of time and abuse...not to mention there are millions of them on the streets. Each link is threaded with both a Right Hand thread and a Left Hand thread at opposite ends so it is easy to adjust the length for fine tuning. We've also included wrench flats on each end of the aluminum link so you can easily tighten your jam nuts without marring the aluminum.

From there, you can add on additional components to attach the links to the vehicle if you haven't already purchased them previously. 

For the Front 3-link you will need the HD Crossmember with integrated Link Mounts, the 3-Link Frame Mount Bracket, and the Adjustable Truss Upper Link Mount that attaches to a flat top truss. This bracket replaces and attaches where the OEM passenger side axle UCA bracket used to be. For the rear you will need the JK Long Arm Rear LCA Frame Brackets, and the JK Rear 3-Link Bracket that attaches to a flat top truss. This bracket replaces the OEM rear axle UCA brackets with a single center mounted bracket on top of a truss. These components are all offered separately as an add-on item since many have either already purchased some of these items, or some of these brackets are included in other kits such as our JK 1 ton swap kits. If you need everything, just click the check boxes next to the appropriate accessories.

We also recommend an aftermarket adjustable rear tracbar, our HD rear axle tracbar bracket, and our HD rear LCA brackets. Some of these components are already included in our JK 1 ton swap kits.

ALL LONG ARM KITS REQUIRE AN EXHAUST LOOP DELETE RIGHT IN FRONT OF THE CROSSMEMBER. THESE ARE AVAILABLE FROM A VARIETY OF EXHAUST SUPPLIERS.

 **If you are using one of our JK 1 Ton Swap Kits, you will need the JK Rear 3-link bracket and it will need to be modified as shown on the product page (JK4430). Some add-on brackets not needed since they are offered in the swap kits** 

 To complete a full swap, simply add Springs/Shocks or Coilovers, and extended brake lines and you are dialed in! 


Included in the kit: 

  • 5 - RH, 5 - LH - 1.25" -12 tpi x 9/16" hole Rock Krawler Joints
  • 5 - RH, 5 - LH - 1.25" -12 tpi Jam Nuts
  • 4 - MASSIVE 2.25" OD 7075-T6 Aluminum Lower Links
  • 1 - 2.0" OD 7075-T6 Aluminum Upper Link
  • 1 - Rock Krawler Suspension double adjustable rear upper control arm with 1.0" Krawler Joints
  • 1 - Rock Krawler Suspension 3 link mount for the frame
Optional Add-on Accessories:
Recommended Accessories (except if you already have a 1 ton swap kit):





 

Related Items

Accessories

Adjustable Truss Upper Link Mount (single)
Average Rating(7)
$29.99
In Stock
JK Under Armor - Four door Bellypan Kit
Average Rating(6)
$1,799.99
Call for Availability
JK 1 TON - SUPERDUTY Rear Sterling Axle Swap Kit
Average Rating(8)
$424.99
Call for Availability
JK 1 TON - Rear 14 bolt Swap Kit
Average Rating(3)
$424.99
Call for Availability
JK HD Crossmember with Link Mounts
Average Rating(3)
$399.99
Call for Availability
JK Front 3-Link Frame Mount Bracket
Average Rating(3)
$49.99
In Stock
JK Long Arm Rear LCA Frame Brackets (pair)
Average Rating(2)
$79.99
In Stock
JK Rear Trackbar Bracket
Average Rating(15)
$62.99
In Stock
JK Rear LCA Brackets with Skids
Average Rating(3)
$121.99
In Stock
JK Rear 3-Link Bracket
Average Rating(2)
$54.99
In Stock
JK 1 TON - Front 60 Swap Kit
Average Rating(5)
$569.99
In Stock
JK 1 TON - SUPERDUTY Front 60 Swap Kit
Average Rating(11)
$569.99
Call for Availability

Recently Viewed Items

Connect With Us
Newsletter Sign Up
PayPalVisaMastercardAmerican ExpressDiscover
3dcart Design by The Cart Designer