THE NEXT GENERATION 44 HIGH STEER ARMS!
Single Arm - Choose Driver or Passenger side
Whether you are just starting out with crossover steering or going full hydro, these arms are meant to handle it all and GIVE YOU OPTIONS AS WELL! Paired with our optional 44 Knuckle Bolt Kit, the exclusive design of these arms not only allow you to set how you attach your steering links but where as well and increase overall knuckle and steering strength at the same time. Check out the diagrams below of just some of the steering linkage mounting options.
Our kit includes two long arms for each side of the axle instead of most manufacturers one long arm only. We know that many vehicles require the use of the tie rod in front and the drag link behind so we made this kit with both long arms.
Studs, cone washers and nuts are optional. Choose 3 stud option for standard OEM knuckles, or 4 stud option for Aftermarket (Reid Racing, Solid, etc.) knuckles with 4th hole.
The Knuckle Bolt Kit is available separately and comes with a 3/4" grade 8 bolt, a 3/4" all- steel mechanical locking nut, a 1.25" outer diameter, a .250" wall sleeve and a knuckle specific bracket.
NOTE: Some 44 knuckle and spindle assemblies do not allow for the use of high steer arms in regards to clearance with the wheel. Wheel spacers may be required with these or any other 44 high steer arms. Most 44 passenger side knuckles do not come drilled and tapped for high steer arms. Please use knuckles that have a flat surface and ensure that they are machined in the exact mirror image of the driver side knuckle. Take note to duplicate both the bolt pattern, and its angle in regard to the ball joint. If this is not machined correctly, the knuckle bolt kit may not align properly on the passenger side.
Designed to incorporate Knuckle Bolt Kit increasing strength*
Optional Knuckle Bolt Kit puts full hydro in DOUBLE SHEER
Crossover Steering or Full Hydraulic Steering compatible
Crossover holes drilled for GM Tie Rod Ends
Drilling available for 3/4" rod end holes.*
Proper 9 degree angle to compensate for knuckle kingpin inclination
Tapered holes for use with standard GM conical washers
4th hole machined for use with aftermarket knuckles
CNC Machined from 1.0" thick 1018 Cold Roll Steel
Aerospace-quality spec machined
Some Possible Configurations
*Extra machining is special order and may increase leadtime. Additional costs may apply. Knuckle bolt kit requires 3/4" holes.
**If you have custom requests, please contact us directly and we can provide you with a quote.