EXPERIENCE OUR NEW LINE OF FABRICATOR'S PARTS
Artec Industries is excited to announce our new line of fabricator's parts. We've taken our own approach to design and made them look different than what you see everywhere else. When you want your project to stand out, it's the little things that count. Not only do these give you a unique look, but they are also strong and highly functional. Check out what this product has to offer.
These Heavy Duty Link Tabs are a great low cost option and with different lengths you can customize the angle that you mount your links.
- For use with square surfaces
- Available in three lengths for mounting at different angles*
- Specifically designed angles for common applications and maximum options*
- CNC Laser cut from 3/8" steel for heavy duty strength.
- 9/16" hole size and easily drilled out to larger sizes up to 3/4"
- Sold in pairs
- Wraps halfway around the tube for more weld surface area
- Unique look - who knew a tab could get your vehicle looks.
*For mounting at different angles refer to the chart below
|Joint Mounting Width||Same length angle||Small & Medium angle||Small & Long angle||Medium & Long angle|
|2.625 inch||0 degrees|
|~22.5 degrees||~14 degrees|
|1.75 inch||0 degrees||~13 degrees||~30 degrees||~19 degrees|
NOTE: For 2.625" large joints (ie 1.25" Heims, Johnny Joints, etc) DO NOT USE TWO SHORT TABS. Only use two short tabs together for 7/8" rod ends or smaller. For large joints needing 0 degree angle, USE TWO MEDIUM TABS.