MAKE THE MOST OUT OF YOUR
44 HIGH STEER ARMS
This Knuckle Bolt Kit is designed to work specifically with our 44 High Steer Arms to both strengthen the entire knuckle and steering as well as provide options for mounting your steering. Whether you just need to re-enforce your knuckle or want to run your tie rod in double sheer, this kit is designed with to fit multiple different steering configurations. Refer to the diagram below for some of the possibilities.
The Knuckle Bolt Kit includes one 3/4" grade 8 bolt, one 3/4" all- steel mechanical locking nut*, one 1.25" outer diameter, .250" wall sleeve, and one knuckle specific bracket. TWO KITS WILL NEED TO BE PURCHASED FOR A PAIR OF HIGH STEER ARMS. THIS KIT WILL REQUIRE WELDING THE SLEEVE TO THE BRACKET FOR BEST FITMENT.**
Please choose the style knuckle you have: REID RACING CHEVY. Other knuckles will be available shortly.
NOTE: Factory tie rod end holes on the knuckle will need to be drilled to a 3/4" hole for this kit to work. THIS WILL REQUIRE USE OF BASIC DRILLING TOOLS.**
3/4" - 16 tpi 4" long Grade 8 bolt
3/4" - 16 tpi All-steel Mechanical Lock nut*
Machined 1.25" OD - .250" wall DOM sleeve
Knuckles Specific Bracket ensures proper fitment
Increases overall knuckle and steering strength
Optional DOUBLE SHEER tab**
Choose to mount over or under arm
Some Possible Configurations
*All-steel mechanical locking nuts (aka distorted thread or Stover locknuts) are designed NOT to be reused to ensure the nut does not loosen over time. This provides the best type of locking nut for steering applications. Please use a new nut if you remove it at any point.
**This part may require basic steel cutting tools and welding to use. Please use caution when cutting steel. Only experienced fabricators should attempt these modifications. Artec Industries, LLC is not liable for injury and/or death due to use or modification of this product.