14 bolt APEX Pinion Guard with Bridge

Warning:  Installing this product requires Welding and Fabrication skills, If you are not confident in your abilities to complete this task please have this installed at an qualified off-road shop .

Step 1.

Inventory all parts to ensure you have all of the correct pieces. If you are missing parts or the package is damaged  Contact Artec Industries Immediately at (855) 278-3299  M-F 8:30-5pm MST If outside of those hours Email us at [email protected] (Please include picture of part number label on box as well as your invoice number Also keep the box and take pictures of the box per shipping carrier for a damage claim otherwise it could be denied )

Step 2.

Slip the PG1401-1 plate into the keyways on PG1404-2  and tack weld into place

Step 3.

Using the 4 supplied  HW0058 bolts  bolt the PG1404-3 onto the PG1404-2

Step 4.

Test fit the Apex Pinion guard on the axle  Depending on your pinion angle you may need to trim the PG1404-3 bracket . Using a marker mark the top of the PG1404-3   remove the pinion guard from the axle and trim were needed .  Prep the Apex truss for welding by removing any paint, rust, or grime.    

Step 5.

Fully weld the PG1404-1 & PG1404-2 together  ,  Now weld the PG1404-3 to the apex truss.

Step 6.

Paint all bare surfaces .